Predictive model for ice formation on superhydrophobic surfaces

The prevention and control of ice accumulation has important applications in aviation, building construction, and energy conversion devices. One area of active research concerns the use of superhydrophobic surfaces for preventing ice formation. The present work develops a physics-based modeling framework to predict ice formation on cooled superhydrophobic surfaces resulting from the impact of supercooled water droplets. This modeling approach analyzes the multiple phenomena influencing ice formation on superhydrophobic surfaces through the development of submodels describing droplet impact dynamics, heat transfer, and heterogeneous ice nucleation. These models are then integrated together to achieve a comprehensive understanding of ice formation upon impact of liquid droplets at freezing conditions. The accuracy of this model is validated by its successful prediction of the experimental findings that demonstrate that superhydrophobic surfaces can fully prevent the freezing of impacting water droplets down to surface temperatures of as low as -20 to -25 °C. The model can be used to study the influence of surface morphology, surface chemistry, and fluid and thermal properties on dynamic ice formation and identify parameters critical to achieving icephobic surfaces. The framework of the present work is the first detailed modeling tool developed for the design and analysis of surfaces for various ice prevention/reduction strategies.     

Characterization of peptide adsorption on InAs using X-ray photoelectron spectroscopy

The well-defined structure and high stability of peptides make them attractive biotemplates for low-temperature synthesis of semiconductor nanocrystals. Adsorbed peptide monolayers could also potentially passivate semiconductors by preventing regrowth of the oxide layer. In this work, the adsorption and passivation capabilities of different collagen-binding peptides on InAs surfaces were analyzed by X-ray photoelectron spectroscopy (XPS). Before peptide functionalization, Br(2)- and HCl-based etches were used to remove the native oxide layer on the InAs surfaces. The presence of the N 1s peak for peptide-functionalized samples confirms the adsorption of peptides onto the etched InAs surfaces. Calculated coverages were similar for all peptide sequences and ranged from ～20 to 40% of a monolayer using the deconvoluted C 1s spectra and from ～2 to 5% for the N 1s spectra. The passivation ability of the peptides was analyzed by comparing the ratios of the oxide components to the nonoxide components in the XPS spectra. The thickness of the oxide layer was also approximated by accounting for the attenuation of the substrate photoelectrons through the oxide layer. We find that the oxide layer regrowth still occurs after peptide functionalization. However, the oxide layer thicknesses for peptide-functionalized samples do not reach as received levels, indicating that the peptides do have some passivation ability on InAs.     

Phthalocyanines: colorful macroheterocyclic sensitizers for dye-sensitized solar cells

Abstract  

Dye-sensitized solar cells (DSSCs) have gained great attention as lower-cost alternatives to conventional photovoltaic devices. One way to improve the excellent efficiencies (ca. 11%) exhibited by DSSCs based on ruthenium polypyridyl dyes would consist in using sensitizers with enhanced light-harvesting properties in the red region of the spectrum. Phthalocyanines (Pcs) are very robust molecules which present extraordinary high extinction coefficients in the 600- to 700-nm spectral region. Intensive research has been focused on reducing the undesired aggregation phenomena of Pcs on the metal oxide surface, while keeping a good electronic coupling between the LUMO of the Pcs and the TiO₂ conduction band, and a good solubility of the dye in organic solvents. Recently, unsymmetrically substituted “push–pull” Pcs have emerged as efficient red-absorbing dyes, reaching power conversion efficiencies of up to 4.7%, when used as single sensitizers.     

Degradation of atrazine by Fenton and modified Fenton reactions

Abstract  

For 50 years, farmers around the world have relied on the herbicide atrazine—one of the triazine family of herbicides—to fight weeds in corn, grain sorghum, sugar cane, and other crops. Although prohibited in the European Union because of widespread contamination of waterways and drinking water supplies, it is still one of the most widely used herbicides in the world. Atrazine and some of its degradation products are among the most commonly found xenobiotics in groundwater and soils in the world. It is also an endocrine disruptor that causes abnormal reproductive development and immune suppression in wildlife. The purpose of this study was to identify the degradation products of atrazine. Fenton reaction treatment, a hydroxyl radical oxidation process recently developed for the degradation of aqueous pesticide waste, was applied to the degradation of atrazine. Classical and modified Fenton reactions have been used as Advanced Oxidation Process treatment methods. A HPLC method was developed and optimized for the identification of resulting degradation products. In general, very good atrazine degradation efficiencies were achieved by both of the methods used. The degradation products, such as oxalic acid, urea, formic acid, acetic acid, and acetone, were identified by HPLC with a photodiode array detector.     

A quantitative comparison of 5-aminolaevulinic acid- and methyl aminolevulinate-induced fluorescence, photobleaching and pain during photodynamic therapy

The characteristics of protoporphyrin IX (PPIX) fluorescence in superficial basal cell carcinoma (sBCC) and carcinoma in situ (Bowen's Disease, BD) following application of 5-aminolaevulinic acid (5-ALA) and its methyl ester (methyl aminolevulinate [MAL]) before, during and after photodynamic therapy (PDT) were investigated in 40 patients. Photosensitizer prodrug penetration can limit PDT efficacy and understanding the characteristics of PPIX fluorescence through fluorescence spectroscopy, may improve knowledge of photosensitizer delivery. Fluorescence intensity was assessed quantitatively, and the rate of photobleaching was determined by fitting an exponential decay. As a secondary end-point, PDT-induced pain was also measured continuously during treatment using a novel hand-held device, known as a pain logger. In vivo PPIX fluorescence was shown to decrease during irradiation, allowing the in vivo photobleaching of PPIX to be monitored. No significant difference was found between ALA- or MAL-induced PPIX fluorescence in lesions of sBCC and BD (P>0.05), indicating no detectable difference in PPIX kinetics for the two prodrugs as assessed by these measures. Pain, as assessed by the logger device, showed high interindividual variability and pain levels tended to be higher initially, decreasing during treatment. No difference was seen in pain experienced during ALA-or MAL-PDT (P>0.05).     

Characterising lone-pair activity of lead(II) by 207Pb solid-state NMR spectroscopy: coordination polymers of [N(CN)2]- and [Au(CN)2]- with terpyridine ancillary ligands

A series of lead(II) coordination polymers containing [N(CN)₂]^? (DCA) or [Au(CN)₂]^? bridging ligands and substituted terpyridine (terpy) ancillary ligands ([Pb(DCA)₂] ( 1 ), [Pb(terpy)(DCA)₂] ( 2 ), [Pb(terpy){Au(CN)₂}₂] ( 3 ), [Pb(4′‐chloro‐terpy){Au(CN)₂}₂] ( 4 ) and [Pb(4′‐bromo‐terpy)(μ‐OH₂)_0.5{Au(CN)₂}₂] ( 5 )) was spectroscopically examined by solid‐state ²⁰⁷Pb MAS NMR spectroscopy in order to characterise the structural and electronic changes associated with lead(II) lone‐pair activity. Two new compounds, 2 and [Pb(4′‐hydroxy‐terpy){Au(CN)₂}₂] ( 6 ), were prepared and structurally characterised. The series displays contrasting coordination environments, bridging ligands with differing basicities and structural and electronic effects that occur with various substitutions on the terpyridine ligand (for the [Au(CN)₂]^? polymers). ²⁰⁷Pb NMR spectra show an increase in both isotropic chemical shift and span (Ω) with increasing ligand basicity (from δ_iso=?3090 ppm and Ω=389 ppm for 1 (the least basic) to δ_iso=?1553 ppm and Ω=2238 ppm for 3 (the most basic)). The trends observed in ²⁰⁷Pb NMR data correlate with the coordination sphere anisotropy through comparison and quantification of the Pb? N bond lengths about the lead centre. Density functional theory calculations confirm that the more basic ligands result in greater p‐orbital character and show a strong correlation to the ²⁰⁷Pb NMR chemical shift parameters. Preliminary trends suggest that ²⁰⁷Pb NMR chemical shift anisotropy relates to the measured birefringence, given the established correlations with structure and lone‐pair activity.     

Synthetic prodiginine obatoclax (GX15-070) and related analogues: anion binding, transmembrane transport, and cytotoxicity properties

Synthetic prodiginine obatoclax shows promise as a potential anticancer drug. This compound promotes apoptosis of cancer cells, although the mechanism of action is unclear. To date, only the inhibition of BCL-2 proteins has been proposed as a mechanism of action. To gain insight into other possible modes of action, we have studied the anion-binding properties of obatoclax and related analogues in solution, in the solid state, and by means of density functional theory calculations. These compounds are well suited to interact with anions such as chloride and bicarbonate. The anion-transport properties of the compounds synthesized were assayed in model phospholipid liposomes by using a chloride-selective-electrode technique and (13)C NMR spectroscopy. The results demonstrated that these compounds are efficient anion exchangers that promote chloride, bicarbonate, and nitrate transport through lipid bilayers at very low concentrations. In vitro studies on small-cell lung carcinoma cell line GLC4 showed that active ionophores are able to discharge pH gradients in living cells and the cytotoxicity of these compounds correlates well with ionophoric activity.     

Charge inversion via concurrent cation and anion transfer: application to corticosteroids

A novel charge inversion process that involves the removal of an excess cation from an analyte ion and the transfer of an anion to the neutral analyte in a single ion/ion encounter is described. Polyamidoamine (PAMAM) half-generation dendrimer anions that contain small anions, such as the chloride ion, were used as charge inversion reagents. Several competing processes can occur that include removal of the cation to neutralize the analyte, the removal of the excess cation and an additional proton to yield the deprotonated molecule, or removal of the excess cation and transfer of a small anion to the analyte. For the latter process to dominate, several requirements for both the reagent anion and the analyte cation must be met. The reagent anion must form multiply charged anions and must be able to incorporate one or more small anions for transfer. The analyte must have no strongly acidic sites as well as a relatively high affinity for small anion attachment. The PAMAM dendrimer anions must meet the conditions for the reagent anions and the cations of the corticosteroids meet the conditions for the analyte. The estrogenic steroid estrone, on the other hand, does not meet the requirements and, as a result, is largely neutralized when reacted with the reagent anions. This reaction, therefore, is highly selective and might serve as a useful reaction for the screening of appropriate analytes.     

Implementation of dipolar direct current (DDC) collision-induced dissociation in storage and transmission modes on a quadrupole/time-of-flight tandem mass spectrometer

Means for effecting dipolar direct current collision-induced dissociation (DDC CID) on a quadrupole/time-of-flight in a mass spectrometer have been implemented for the broadband dissociation of a wide range of analyte ions. The DDC fragmentation method in electrodynamic storage and transmission devices provides a means for inducing fragmentation of ions over a large mass-to-charge range simultaneously. It can be effected within an ion storage step in a quadrupole collision cell that is operated as a linear ion trap or as ions are continuously transmitted through the collision cell. A DDC potential is applied across one pair of rods in the quadrupole collision cell of a QqTOF hybrid mass spectrometer to effect fragmentation. In this study, ions derived from a small drug molecule, a model peptide, a small protein, and an oligonucleotide were subjected to the DDC CID method in either an ion trapping or an ion transmission mode (or both). Several key experimental parameters that affect DDC CID results, such as time, voltage, low mass cutoff, and bath gas pressure, are illustrated with protonated leucine enkephalin. The DDC CID dissociation method gives a readily tunable, broadband tool for probing the primary structures of a wide range of analyte ions. The method provides an alternative to the narrow resonance conditions of conventional ion trap CID and it can access more extensive sequential fragmentation, depending upon conditions. The DDC CID approach constitutes a collision analog to infrared multiphoton dissociation (IRMPD).